NABL Calibration &
Testing Services
in Gujarat
Gujarat's most trusted NABL-accredited calibration laboratory. ISO/IEC 17025:2017 · NABL CC-2480 · NPL Traceable · ILAC MRA. Calibrating 200+ instrument types for 5000+ industries across Gujarat since 2004. Onsite · Urgent · Same-day certificate.
ISO/IEC 17025:2017
NABL CC-2480
— OUR CALIBRATION SERVICES —
Complete Calibration & Testing Scope
NABL CC-2480 accredited calibration for all instrument categories — dimensional, pressure, temperature, electrical, mass & flow, torque, biomedical, and hardness testing.
Dimension Instruments
Vernier caliper, micrometer, dial gauge, height gauge, ring/plug gauge, thread gauge, length standards. NABL-traceable certificates for ISO 9001, IATF 16949 and BIS audits.
Pressure Instruments
Pressure gauge, transmitter, differential pressure gauge, manometer, safety relief valve, vacuum gauge, compound gauge. NPL-traceable, NABL CC-2480 certificates.
Temperature Instruments
Thermocouple (Type K, J, R, S, B), RTD / PT100, temperature transmitter, PID controller, infrared pyrometer, temperature recorder, oven / furnace / bath calibration.
Electrical & Electronics
Multimeter, clamp meter, ammeter, voltmeter, insulation tester, earth resistance tester, power analyzer, energy meter, frequency meter, universal calibrator.
Mass, Volume, Flow & Velocity
Weighing balance, standard weights (E1, E2, F1, M1), micropipette, burette, measuring cylinder, hydrometer, flow meter, spring balance, lactometer, butyrometer.
UTM & Torque Wrench
Torque wrench calibration, torque transducer, torque transmission, universal testing machine (UTM), tensile testing machine, compression testing machine, force gauge.
Biomedical Instruments
BP monitor, ECG machine, defibrillator, infusion pump, patient monitor, autoclave sensor, clinical thermometer, medical scales, anaesthesia machine pressure calibration.
Hardness Tester
Rockwell hardness tester, Brinell hardness tester, Vickers hardness tester, Shore durometer (rubber/plastic), portable / Leeb hardness tester, surface roughness tester.
HART Calibration
HART-enabled instrument calibration for 4–20 mA process loops. Pressure transmitters, temperature transmitters, level transmitters and all HART process instruments.
— WHY CHOOSE PRISM —
Gujarat's Most Trusted NABL Calibration Lab
20+ years of unbroken calibration excellence — serving 5000+ industries from Ahmedabad GIDC Vatva to every corner of Gujarat.
NABL CC-2480 Accreditation
Held under ISO/IEC 17025:2017. NPL-traceable calibration certificates accepted in ISO 9001, IATF 16949, NABH, GPCB, BIS, and international audits under ILAC MRA (100+ countries).
Onsite at Your Facility
Engineers travel to your plant, lab, or hospital across all of Gujarat with portable traceable standards — no instrument removal, zero production disruption.
48-Hour Certificate Delivery
Standard NABL certificates issued within 48 hours. Same-day urgent service available for pre-audit calibration — ensuring you never miss a compliance deadline.
70+ Specialist Engineers
Dedicated calibration engineers for each discipline — dimensional, pressure, temperature, electrical, biomedical, and torque specialists.
200+ Instrument Types
Widest calibration scope in Gujarat — from micrometers and balances to HART transmitters, UTMs, and biomedical equipment — one partner for all.
Zero Audit Failures, 20 Years
Since 2004, every NABL certificate issued by Prism has been accepted in ISO, IATF, NABH, GPCB, and OISD audits. Zero rejections across 5000+ clients.
— HOW IT WORKS —
Our Calibration Process
Request & Schedule
Submit your instrument list via phone, WhatsApp, or the form below. We prepare a quote within 24 hours and schedule onsite or in-lab calibration at your convenience.
Calibration Performed
NABL-certified engineers calibrate your instruments using NPL-traceable reference standards — following NABL CC-2480 accredited procedures with documented environmental conditions.
NABL Certificate Issued
NABL certificate with calibration results, measurement uncertainty (k=2), NPL traceability, and accreditation number CC-2480 — issued within 48 hours. Urgent: same day.
Schedule Management
Prism tracks your calibration due dates and sends reminders before expiry — ensuring you are always audit-ready and never miss a calibration deadline.
— ACCREDITATION & TRACEABILITY —
Calibration Accepted in All Major Regulatory Audits
Prism NABL CC-2480 certificates are accepted in every regulatory, quality management, and accreditation audit in India and internationally under ILAC MRA.
ISO 9001:2015
Quality Management System
IATF 16949
Automotive QMS
NABH
National Accreditation Board for Hospitals
NABL ISO 17025
Lab Calibration Standard
GPCB / MoEFCC
Environmental Compliance
FSSAI / HACCP
Food Safety Regulations
OISD / PESO
Oil & Gas Safety
BIS / IS Standards
Bureau of Indian Standards
NABL Accreditation — CC-2480
Prism is NABL accredited under ISO/IEC 17025:2017 — calibration number CC-2480. NPL (National Physical Laboratory India) and BIPM traceable. Internationally recognized under ILAC MRA in 100+ countries — accepted by US FDA, EU regulatory bodies, WHO, and all major international auditors.
5000+
Industries
200+
Instrument Types
20+
Years
— WHY CHOOSE PRISM —
NABL CC-2480 · 20+ Years ·
5000+ Clients Served
Since 2004, Prism Calibration Centre has been Gujarat's most trusted NABL-accredited calibration and compliance partner — with zero audit failures across 20+ years.
— INDUSTRIES WE SERVE —
Calibration for Every Industry in Gujarat
From pharma GMP to oil & gas OISD, from NABH hospitals to IATF automotive — Prism calibrates for every regulated industry.
Auto Components & Engineering
IATF 16949 / TS 16949 compliant dimensional calibration for gauges, fixtures, and measuring instruments used in production.
Know MorePharmaceuticals & Biotech
GMP / WHO GMP compliant calibration. Calibrated instruments accepted in FDA and EU-GMP audits.
Know MoreTool Room & Precision Metrology
High-accuracy calibration for precision tools — gauge blocks, height gauges, micrometers — used in tool room and metrology labs.
Know MoreOil, Gas & Petrochemical
Dimensional gauges and measuring instruments calibrated per industry standards for pipeline, refinery, and process equipment.
Know MoreAerospace & Defense
Traceable dimensional calibration to NPL/BIPM standards for aerospace-grade components requiring tight tolerances.
Know MoreFood, Beverage & FMCG
Dimensional calibration for packaging, filling, and quality control instruments in food grade environments.
Know MoreCement, Steel & Metal
Robust calibration for measurement instruments used in high-temperature and high-particulate manufacturing environments.
Know MoreElectronics & PCB Manufacturing
High-resolution micrometer and caliper calibration for PCB thickness, component height, and fine dimensional tolerances.
Know More— WHERE WE SERVE —
Onsite Service
Across Gujarat
Engineers travel to your facility with portable reference standards. No instrument removal, zero production downtime. All GIDC zones and industrial areas covered.
NABL CC-2480 · ISO/IEC 17025:2017 · NPL Traceable · ILAC MRA
Need NABL Calibration for Your Instruments?
Onsite Gujarat · Same-day urgent · NABL certificate within 48 hours
— FAQs —
NABL Calibration — Frequently Asked Questions
— GET IN TOUCH —
Talk to Our NABL
Calibration Experts
Send your instrument list, tell us your audit deadline, and we'll prepare a quote within 24 hours — with onsite scheduling to fit your production calendar.
- +91 98245 26444
- info@prismcalibration.com
- F-101, Rudraksh Complex 2, GIDC Vatva, Ahmedabad – 382445
- Mon – Sat · 9 AM – 7 PM
Request a Free Calibration Quote
— FROM OUR BLOG —
Related Articles & Guides
Instrument Calibration Process — Step-by-Step Guide (2026)
Understanding the calibration process helps industries in Gujarat make informed decisions about their measurement equipment. Here's the complete step-by-step calibration procedure used at NABL labs.
Read More
ISO/IEC 17025 Calibration Laboratory in Gujarat — Prism CC-2480
ISO/IEC 17025:2017 is the international standard for calibration laboratories. Prism Calibration Centre is Gujarat's NABL-accredited ISO 17025 lab serving 5000+ industries.
Read More
NABL Calibration Certificate — What It Means & Why You Need It
A NABL calibration certificate is more than a document — it's evidence of measurement traceability and a quality compliance requirement for ISO, IATF, FDA, and export audits.
Read More